HDPE TS Workboats

The HDPE Workboats, SAR, and WindMill models are designed with a deep V-hull, ideal for inshore operations. These boats rank among the safest in their class, featuring min 2 x 2 separate air
compartments, anti-slip decks, and self-bailing systems. Each Workboat comes standard with an anchor compartment with hatch, two bollards, and integrated hoisting points. HDPE Workboats are available in various lengths starting from 7.00M, with fully customized builds available on request.

TS 7200 – 8700 – 9200 specifications

Standard Equipment

1. HDPE hull (black) incl. cabin
2. 10 mm HDPE fender (red, UV-resistant)
3. Foam filling inside the 500 mm tube
4. Tube structure divided into compartments by bulkheads
5. Self-drainingdeck – 2 outlets (Ø50 mm) in transom
6. Drainage plug in transom (Ø25 mm) from DB
7. Tunnel in hull for control systems (Ø90 mm) – 2 pcs
8. Towing points at aft – 2 pcs
9. Inspection hatch (Ø190 mm) for fuel tank – 1 pc
10. Inspection hatch (Ø190 mm) for engine bolts – 1 pc
11. Drainage plugs (Ø25 mm) in technical compartments – 2 pcs
12. Drainage plug (Ø25 mm) in fuel compartment – 1 pc
13. Fuel compartment ventilation system
14. Reinforced transom with AL angle bar 130×65 mm
15. Mooring points (cleats) – 4 pcs
16. Lifting pad eyes – 4 pcs
17. Stainless steel hatch holders – 3 pcs
18. Safety rope around the boat (Ø18 mm, navyblue)
19. CE Certification, Category C

Optional Equipment

1. 210 L fuel tank installed in DB – 1 pc
2. Fuel inlet (Ø50 mm) in aft – 1 pc
3. Fuel tank ventilation system
4. Storage compartments in aft – 3 pcs
5. Lockable hatches (Roca) – 6 pcs
6. Stainless steel hatch holders – 3 pcs
7. Storage compartment with door in bow – 1 pc
8. Technical storage in aft with hatches – 2 pcs
9. Aft steps with CNC anti-slip finish – 2 pcs
10. Step platform with CNC anti-slip finish – 1 pc
11. Side benches (L2000xW230mm) – 2 pcs
12. Soft seats on aft storage compartment (thickness: 50 mm) – 3 pcs
13. Removable non-slip rubber mat on deck
14. Center console with access hatch – 1 pc
15. Windshield with stainless steel rail on console – 1 pc
16. Main switch (Bluesea) installed on console – 1 pc
17. Switch panel for navigation lights + spare (total 4 switches, Bluesea)
18. Battery holders under console – 2 pcs
19. Manual bilge pump from DB (35 L/min)
20. A-frame in aft for navigation lights (stainless steel)
21. Bow railings (stainless steel)
22. Navigation lights
23. Top light
24. External fuel separator box
25. Ultraflex hose through bulkhead for hydraulic steering